Halo Jellie Glue 15g

Application 1. Complete prep and cuticle work as normal, on clean and natural nails. Remove any debris from nails, using a Halo Plush Brush and Halo Prep & Scrub. 2. Size the Halo Jellie Tips to your client’s nail beds, ensuring they fit perfectly from side wall to side wall, without needing to push the tip flat to the nail bed. 3. Apply Halo Flexi-Bond or Halo Rubber Base Coat to the nail and cure for 30 seconds. 4. Scoop a small amount of Jellie Glue onto the contact area of the Jellie Tip. a. Alternatively, if opting to use Jellie Brush on Glue, paint glue onto the contact area of the Jellie Tip. 5. Place the Jellie Tip on to the nail plate by tilting the tip at an angle, placing the cuticle area first. Slowly press the rest of the Jellie Tip down so that it fits perfectly with no air bubbles. Remove any Jellie Glue that may have escaped from under the tip. 6. Hold the Jellie Tip down and flash cure. Once all tips are applied, cure the whole hand for 30 seconds under the Halo Smart Dual Cure Lamp. 7. Cut the Jellie Tip down to size and shape if required. Buff over the Jellie Tip to remove the shine and carefully around the cuticle area to ensure it sits flush. 8. Apply Prep & Scrub using the Halo Plush Brush to remove any dust and debris. Apply Halo Base Coat, colour of choice and Halo Non-Wipe top coat, curing each layer for 30 seconds. 9. Allow the nails to cool down for two minutes before applying Halo Cuticle Feed. Removal 1. Break the Jellie Tips seal using a Halo Elite Buffer File. 2. Cut away any additional length of the Jellie Tip. 3. Using your preferred method of removal, soak off the Jellie Tips as you would a gel polish. a. Top Tip – we recommend using a heated soak off bowl and Pure Nails Acetone!